• Organise Free Seminar (Robotics/Embedded Engineering) Click Here

Wireless solutions

4 Channel Transmitter & receiver with motor driver(L293d)
Product Id - (BBPI#419)

  • Control your robot wirelessly without programming or micro controller.
  • Tx board has four push button switches for moving robot (forward,rignt ,left backward ).
  • One button is reserved for the user for other activity.
  • Works on 344 MHz frequency.
  • On Tx board 5V regulator converts 9V  to 5V.
  • The receiver end gets the signal till the button is pressed on transmitter.
  • Rx board can take inputs from 9V to 12V.
  • Extra headers are provided to tap 5v power.
  • On board H Bridge driver is capable of driving two DC motors.
  • Two floating bugs for taping signals for other control activity on Robot.
  • Working range 60 to 80 Meters.
  • Cost Rs 1200

Fourteen(14) CHANNEL RF transmitter and receiver card
Product Id - (BBPI#418)

  • 14 channel RF card allows you to control your complete robot wirelessly.
  • It gives the flexibility to control seven independent DC MOTORS in forward and backward direction .
  • User also has the flexibility to interface  Rx outputs to micro controllers.
  • Tx board has 16 push button switches (2 dummy)
  • Each button generates unique signal.
  • The Rx end gets the signal till the button is pressed .
  • System Works on 344 MHz frequency.
  • Tx board Dimension 100mm X 120mm .
  • Rx board can be directly connected with seven DC MOTORS
  • There are fourteen status led for each channel.
  • On board power connector for 12v input.
  • Dimension 130mm X 135mm
  • Working range 60 to 80 Meters
  • Working video on youtube channel "Bimal bots"
  • https://www.youtube.com/watch?v=L6suDY9neHs&t=10s
  • Cost Rs 5500

Four Channel RF Transmitter & receiver card
Product Id - (BBPI#417)

  • Tx board has four push button switches for moving robot (forward, backward, right, left)
  • Works on 344 MHz frequency.
  • On Tx board 5V regulator converts 9V  to 5V.
  • Tx board has power status led.
  • Tx board is small, with four mounting holes.
  • The receiver end gets the signal till the button is pressed on transmitter, once the button is released no signal is transferred.
  • Rx board is small, with four mounting holes.
  • Rx board can be interfaced with micro controllers using headers pins.
  • Rx board has  can take inputs from 9V to 12V.
  • Rx board has four led for monitoring  signals.
  • Rx board has one power status led.
  • Both Tx & Rx are Two layer superior quality boards.
  • Working range 60 to 80 Meters.
  • Working video on youtube channel "Bimal bots"
  • https://www.youtube.com/watch?v=thumHIacZJM
  • Cost Rs 1000
 

Book Now